Magnesium Test Kit - Salifert
Magnesium Test Kit - Salifert
Couldn't load pickup availability
10 in stock
Magnesium helps keep calcium and alkalinity stable. When it is low, those two are hard to hold steady however much you dose. The Salifert Magnesium Profi-Test is a syringe titration with a clear colour change.
Tests and range
Typically around 50 tests per kit. The chart reads up to 1500 ppm. Natural seawater sits around 1280 ppm, varying with salinity. Calcium does not interfere when it is between 300 and 500 ppm, which is normal for a reef.
How to test
- Use the 2 ml syringe to add 2 ml of tank water to the test vial.
- Add 5 drops of Mg-1 and swirl gently for 5 seconds.
- Fit the plastic tip to the 1 ml syringe and draw up Mg-2 until the lower end of the black piston sits on the 1.00 ml mark. Keep the tip under the liquid while drawing so no bubbles get in.
- Add Mg-2 drop by drop, swirling for a second or two after each drop, until the colour turns grey or blue (whichever you see first). You can add about 60% of the expected amount in one go to save time.
- Hold the syringe tip up, read the position of the upper end of the black piston (each division is 0.01 ml), and look up the magnesium value in the chart.
A small air gap between the liquid and the piston is normal and does not affect the result, so don't try to purge it.
Safety: keep out of reach of children and not for consumption.
FAQ
Why does magnesium matter?
Low magnesium makes calcium and alkalinity harder to keep stable, so check it whenever those two keep drifting.
How often should I test?
Magnesium changes slowly, so most reef tanks only need it tested every week or two.
See the full range of Salifert test kits. Dry goods ship Australia-wide.
