This is a marine / reef product. You're shopping Freshwater —
Phosphate Test Kit - Salifert
Phosphate Test Kit - Salifert
Couldn't load pickup availability
Out of stock
High phosphate fuels nuisance algae and can slow coral growth, while too little can starve corals. A sensitive test lets you see where you sit. The Salifert Phosphate Profi-Test is a colour-chart test read from above for a clearer match.
Tests and range
Around 60 tests per kit. Detects phosphate from 0.015 mg/L. Results are in ppm phosphate; divide by 3 for ppm phosphorus. For higher sensitivity, double the water sample and the reagents, then divide the chart value by 2.
How to test
- Use the syringe to add 10 ml of tank water to the test vial.
- Add 4 drops of PO4-1 and swirl gently for 10 seconds.
- Add 1 level scoop of PO4-2 and swirl gently for 30 seconds.
- Stand the open vial on the white part of the colour chart and compare colours looking down from the top. A colour between two blocks means a reading between those values.
Readings can be wrong if alkalinity is above 20 dKH. Reef tanks are normally well below that.
Safety: keep out of reach of children. PO4-1 contains hydrochloric acid (under 10%) and causes serious eye irritation, so wear eye protection. If it gets in your eyes, rinse carefully with water for several minutes, and get medical advice if irritation continues.
FAQ
Is it sensitive enough for a reef?
Yes. It picks up phosphate from 0.015 mg/L, which is useful in low-nutrient systems.
What should I test alongside phosphate?
Nitrate. See our Nitrate Test Kit.
See the full range of Salifert test kits. Dry goods ship Australia-wide.
